0102 ACG J Type 4HP (SOLD)

Body woods. ASH Neck. 3 piece Maple with Mac Ebony board 24 fret with flat radius. Dual action trussrod and carbon rods. Carved

0106 Skelf R Type 4 fretless.

Mineral stained White Limba body with American Sycamore top and 4mm Bubinga accent. 5 piece Wenge/Bubinga neck with an acrylic impregnate Lava Bubinga board 33" scale. Hipshot/Graphtech piezo bridge

0105 Recurve Classic Single Cut 5 fretless.

Cocobolo top with Black Walnut body. 5 piece neck Purpleheart/Wenge/Maple with acrylic impregnated Mac Ebony lined board. RFB in the neck SB in the bridge. ACG EQ01 pre-amp. satin

Finn 4 for Ian.

Claro Walnut top with a Butternut body. 5 piece Wenge/Maple neck with Acrylic Impregnated Mac Ebony board. 2 x FB humbucker built into a Wenge/Claro Walnut ramp.

Finn Classic single Cut 5 for Michael.

Black Limba body with a flame Bubinga top. 5 piece Weneg/Bubinga neck with acrylic impregnated Birdseye with custom edge markers.Maple board. 2 x FB pickups into ACG EQ03

Recurve Classic Single Cut 7 string for Javier

Alder body with Ziricote top. 7 piece Wenge/Maple neck with acrylic impregnated book matched Lava Bubinga board. ACG EQ03 5A/P pre-amp. 2 x FB hum buckers with Ebony ramp

9 string headless for Bob.

Custom shape based on the Recurve Classic shape. Alder body with figured Mahogany top. 7 piece Bubinga/Wenge/Maple neck with lined Ebony board. Hipshot headless hardware with piezo and custom

0096 J Type 4SU

Spec. Body woods. Alder on solid colour basses. Neck. 3 piece Maple with either a Rosewood or Acrylic Impregnated Birdseye Maple board.

0095 Finn Classic 6

Ziracote top with Ash core and Wenge back. 5 piece Wenge/Flame Maple neck with an Ebony board. ACG SB pickups and custom East U-Retro. Satin finish.

Recurve 5 for Rob.

Myrtle top on a Black Walnut body. 5 piece Flame Maple/Walnut/Maple neck with an Ebony board. 2 x ACG FB humbuckers and ACG EQ01 pre-amp. Satin finish.

0094 Salace 6 headless.

Maracarpra top with Wenge body. 7 piece Wenge/Maple neck with Ebony board Luminlay side dots. ACG RFB in a wenge/Mac Ebony cover into an ACG EQ02 3K pre-amp.

0093 Salace 5 headless.

Holly top with Bloodwood accent on to Black Walnut body. 5 piece Wenge/Bloodwood neck with Acrylic Impregnated Birdseye Maple finger board. PB and RFB in Bloodwood cover into an

0092 Recurve S Type 5.

Rose Myrtle Burl top with Purpleheart/Wenge accent on to a Swamp Ash body. Wenge/Purpleheart Ash 7 piece neck. Acrylic Impregnated Mac Ebony board. ACG FB pickups in Wenge/Myrtle cover

Finn R Type Single Cut 5 headless for Travis.

Black Limba body core with Flame Redwood front and back with 4mm Wenge accent. 5 piece Wenge/Black Limba neck with and Acrylic Impregnated Wenge finger board. Hipshot/Graphtech headles unit

Recurve S Type Single Cut 6 fretless for Jan.

One piece highly figured Maple body. Cocobolo/Flame Maple 7 piece neck with an epoxy coated Cocobolo board. East U-Rero deluxe Cocobolo pickup cover and control cavity cover. Gold hardware.

Recurve S Type single cut 6 for Hoyer.

Swamp Ash body core with Claro Walnut front and back. 7 piece Wenge/Flame Maple neck with a Pale Moon Ebony board. ACG EQ01 with SB in the bridge and

Recurve Single Cut 5 fretless for Andy

Mahogany core with Myrtle back and front. Maple/Wenge 5 piece neck with an Ebony board. ACG Eq01 pre-amp and FB pickups.

Salace Single Cut 10 string headless for Ben.

Paulowina core with Cocobolo front and back and 3mm Wenge accents. 7 piece Flame Maple/Wenge bolt on neck with a bookmatched Ziracote finger board 33" to35" multi scale. Custom

0090 Recurve S Type 7 (LH)

Alder body. 7 piece Maple/Wenge neck with an acrylic impregnated bookmatched Mango board zero radius. East 3 band SPM pre-amp ACG quad coil in Wenge/Ebony ramp. Dunlop Dual Straplocks.

0091 Recurve Single Cut 5

Figured Blackwood back and front with 4mm Sycamore accent and Spanish Cedar core. Wenge/Maple/Padauk neck with an Acrylic Impregnate Flame Sycamore board. ACG SB in the bridge and RFB

0084 Finn R Type Single Cut 5

Cocobolo top with a black Limba body core. Flame Maple/Wenge neck with a Bocote finger board zero radius. 2 x ACG RFS triple coils plus Hipshot/Graphtech piezo. Low battery

0089 Moth prototype.

Tulipwood body with Black Walnut top and Wenge accent. Deep set Wenge/Ash neck with Ebony finer board Maple fretlines 33" scale no radius. Extensive carving on the back of

0085 Recurve S Type 5

Claro Walnut top with a Black Limba body. Flame Maple/Wenge 5 piece neck with an Acrylic Impregnated Bloodwood finger board with black fretlines 26 fret zero radius 33" scale

0088 Tefano 4 Short Scale (FOR SALE) SPEC UPGRADE.

Blackheart Sassafras top with a Black Walnut body. 5 piece Black Limba/Wenge neck and a Mac Ebony finger board 31.5" scale zero radius. Now fitted with an ACG

0087 Skelf Chambered Piezo fretless 5.(FOR SALE)

Spanish Cedar chambered body with Zebrano accent and figured Makore top. Wenge/Zebrano/Padouk neck with an Ebony board with Maple fretlines. 34" zero radius. Hipshot/Graphtech bridge and an ACG EQ02

0086 Finn Single Cut 5

Amboyna Burl top with a Flame Spanish Cedar body with Wenge centre block. Wenge/Bubinga/Maple 7 piece neck with a book matched Acrylic Impregnated Spalt Maple board. Asymmetric neck profile

0083 Harlot 5 headless.

Blue Gum Burl top with a Wenge body. 7 piece Bubinga/Wenge neck with an Acrylic Impregnated Ebony board. Custom ETS bridge and tuning unit and ACG custom headpiece. ACG

0082 Harlot 5 headless.

Harlot 5 headless. Flame Sycamore body with Amboyna back and front. Bubinga/Flame Maple 7 piece neck and an acrylic Impregnated Quilt Maple finger board. ETS custom bridge and

0081 Gallus 4 Single Cut

Blue Gum Burl top with an American Cherry body. Wenge/Mahogany neck with Pale Moon Ebony board. Hipshot tuning unit and custom ACG headpiece. RFS triple coil in the bridge

0080 Recurve 4 fretless.

Mauser Birch top with 4 mm Wenge Accent and White Limba body. Wenge/Bubinga/Maple 5 piece neck with Ebony board. Hipshot Type A with piezo and SB in bridge RFB

Salace 4 for Paul.

Wenge/Ash body core with a Maracarpra top which will have a blue/green stain. 3 piece Wenge/Ash neck with an Acrylic Impregnated Flame Sycamore finger board no radius. ACG FB

Finn 4 for Mark

Black Walnut with a Spalt Maple top and 4 mm Purpleheart accent. 5 piece Wenge/Maple neck with Acrylic Impregnated Purpleheart finger board bound with Birdseye Maple no radius.. ACG

Salace 4 for Chris.

Alder body with Zebrano top and 4 mm Purpleheart accent. Maple with Purpleheart pinstrip and Acrylic Impregnated Spalt Maple finger board with 2mm Purpleheart accent under the board. ACG

0077 Finn 5 Single cut.

Holly top with Bloodwood accent and Black Limba body. Body is chambered. 3 piece Northern Ash Neck with an Acrylic Impregnated Bloodwood board 32" scale tuned E to C.

0079 Recurve S Type 6

One piece Swamp Ash body. 7 piece Mac Ebony/Flame Maple neck with 26 fret 34.5" scale Mac Ebony board. Two ACG RFS pickups in Mac Ebony covers. East U-Retro

0078 J Type 5

American White Ash body with a 3 piece Wenge/Padauk neck. Mac Ebony fingerboard with no radius. ACG EQ01 pre-amp with a SB single coil and a PB split coil

0076 Recurve S Type 7

Black Limba body core with Flame Redwood top and back. 7 piece Maple/Wenge neck with a Lava Bubinga bookmatched finger board. 2 ACG EQ02 pre-amps and two RFS triple

0075 Tefano prototype.

First Tefano shortscale bass. Ash body with Dirty Finish. Wenge/Padauk 3 piece neck with a Pale Moon Ebony board no radius and the standard asymmetric neck carve. 31.5' scale.

0074 Finn 6 ( Review added.)

Flame Spalt Maple top with an Ash body core. 7 piece Wenge/Maple neck with Acrylic Impregnated Birdseye Maple board. ACG FB humbuckers and ACG EQ01 pre-amp. Satin finish.

0072 Recurve 6 fretless.

The first Recurve 6 and the first set neck in one of my double cut designs. Wenge top with a Black Limba body. 7 piece Wenge/maple/Black Limba neck

0073 Finn 4 headless.

Swamp Ash body with 4 mm Wenge accent. Flame Sycamore top with blue/green stain. Full gloss finish. Flame Maple with black veneer stringers and a heartwood Birdseye Maple

0071 Skelf piezo fretless

Lacewood top with a chambered Honduran Mahogany body. 5 piece Maple/Mahogany neck with lined Ebony board. Hipshot/Graphtech piezo bridge with an ACG EQ02 3K pre-amp. Strung with TI flats.

0069 Harlot headless 5.

Ash body wings with Asian Ebony top. 5 piece Flame Maple/wenge neck thru. Acrylic Impregnated Flam Sycamore finger board. ACG EQ01 pre-amp with a RFS triple coil in the

0070 Hopper Custom.

This is an unusual bass for me in that it is fully custom which is not something I would normally do and will probably not be doing again. I

0067 Recurve 5 fretless.

Figured Myrtle top with an American Black Walnut body. 5 piece Birdseye Maple/Mac Ebony neck with an Ebony finder board with maple fretlines no radius. ACG RFS pickup

0068 Finn 5

Ash body with a 3 piece Purpleheart/Maple neck and a Goncalo Alves finger board no radius. Hipshot Type A 18 mm Ultralites. ACG EQ01 pre-amp and two SB single

0065 Gallus 4

First Gallus bass to be built. Ash body with Mac Ebony top and a Wenge/Ash accent. Wenge/Bloodwood 5 piece neck with an acrylic impregnated Black Limba finger board.

0062 Recurve 5.

Butternut body with a figured Maple top and a purpleheart accent. 5 piece Maple/Purpleheart neck with an acrylic impregnated Purpleheart board. ACG SB in the bridge with a RFB

0064 Recurve 5 fretless.

Black Limba body with a Wenge/Limb/Wenge centre strip. Wenge/Black Limba 5 piece neck with an acrylic impregnated Mac Ebony board with no radius. ACG RFS triple coil with

0066 Recurve 4

One piece Black Limba body with a Black Limba/Wenge 5 piece neck. Acrylic Impregnated Birdseye Maple finger board with no radius. Hipshot Type A bridge,Ultralite tuners,Schaller straplocks. ACG RFB

0063 Recurve Single Cut 10

The first ten string built in the UK to the best of my knowledge. Black Limba body with Wenge centre strip. Blackheart Sassafras top. 7 piece Wenge/Maple neck with

0061 Finn 4.

Ash body with a Wenge/Padauk neck. Mac Ebony finger board with no radius alloy side dots. Hipshot Type A and Ultralites. Schaller straplocks. ACG EQ02 4 K/S pre-amp.

0060 Recurve S Type 5 (LH)

5 piece body with Mac Ebony top and Wenge back and core Sycamore accents. Neck 7 piece flame Sycamore and Mac Ebony with an acrylic impregnated flame Sycamore board

0056 Harlot 5

Mahogany core with Burl Myrtle top and a figured Myrtle back. 5 piece Birdseye Maple/Mac Ebony neck with an Acrylic Impregnated Black Ebony board with Birdseye binding. ACG EQ01

0057 Recurve S Type 6

Camphor top and back with American Ash core. 7 piece Wenge/Flame Maple neck with a Pale Moon Ebony board. Finger board has Camphor blocks along the top/front of the

0049 Finn 4 fretless.

Claro Walnut top and back with a Black Walnut core and 4 mm Sycamore accents. Bubinga/Wenge 5 piece neck with an Acrylic Impregnated BlackEbony board. Hipshot Type A with

0048 Recurve 6 single cut.

Swamp Ash body with 7 piece Wenge/Maple neck. Pao Ferro finger board with no radius. ACG SB in bridge and RFB in neck ACG EQ01 pre-amp. Hipshot Type A

0047 Chambered Skelf Fretless.

Prototype chambered body with piezo bridge. Swamp Ash body with Myrtle back and front extra depth body. 3 piece Wenge/Ash neck with Indian Ebony board with fret lines no

0046 Harlot 4 fretless.

Flame Sycamore top with a Butternut body. Black Ebony board with partial fretlines. 5 piece Maple/Mac Ebony neck. RFB and piezo bridge into ACG EQ01. Extender on the E

0045 Recurve S Type 5 fretless.

Birdseye/flame Redwood top with a Mahogany core and Sycamore accent line. 7 piece Maple/Bubinga/Maple/Wenge with Acrylic Impregnated Mac Ebony board with maple fret lines. ACG EQ01 pre-amp

0044 Finn 4

Quilt maple back and front with a bubinga core. 5 piece wenge/maple neck with a mac ebony fingerboard. Green burst on back and front. 2 ACG RFB pickups with

0043 Finn 4

Spec Okoume top with 4 mm wenge accent on to a swamp ash body. 3 piece flame maple neck with an acrylic impregnated figured bubinga finger board. Amber LEDS

0041 Recurve S Type 6

Flame Bubinga top and back with Black Limba core. 7 piece Mac Ebony/Black Limba neck with an Acrylic impregnated Mac Ebony finger board. Hipshot piezo bridge 2 ACG

0042 Harlot 6 fretless

Alder body with 7 piece Mac Ebony/Maple/Black Limba neck with Ebony finger board. ACG FB pickups and EQ01 pre-amp. Hipshot piezo bridge feeding a Graphtech Hexpander and 13

0040 Finn Guitar

Camphor Burl top and back with a Black Limba body. 3 piece Bubinga/Wenge neck with ebony finger board 25" scale. P90 in the neck Alinco 5 humbucker in bridge

0038 Finn 4 (headless)

Based on the Finn but modified to accommodate headless hardware. Wenge body with a Mac Ebony top and a 4 mm Bloodwood accent. Wenge/Bloodwood 5 piece neck. finger

0036 Skelf 5

Spec White Limba body with a Native Walnut top usual black veneer. Wenge/Maple 5 string neck with a Mac Ebony board 33" scale tuned E to C. ACG FB

0037 Finn Single Cut

Spec First of a new model. 4 string 34" scale 5 piece body stripy ebony/sycamore/wenge/sycamore/ stripy ebony 7 piece neck mac ebony/sycamore/wenge/sycamore Acryilc impregnated flame sycamore board with mac

0035 Harlot 5 (headless)

Spec Camphor Burl top and back with a Flame Sycamore body. Bubinga/Flame maple neck with a bookmatched Acrylic Impregnated Spalted Maple finger board. The fingerboard and the Camphor both

0034 Recurve single cut 9 string. (Review now added.)

Body core in Swamp Ash with a Mahogany top. 7 piece Wenge/Maple neck with a book matched Acrylic impregnated Spalted Maple finger board. 2 ACG FB pickups with coil

0033 Recurve 5 single cut (LH)

Blackheart Sassafras top with a white limba body. Purpleheart/wenge /flame sycamore neck with acrylic impregnated Zebrano finger board. SB and FB narrow format passive electronics volume 4 way rotary

0032 Harlot S Type 4 string. Review added.

First 4 string single cut. Amboyna top mahogany core with a flame sycamore back. 5 piece maple/mac ebony neck with an Ebony finger board. 2 RFB with the

0017 Skelf (Lazarus bass)

Bit of a story with this bass which has been named by Eude as the Lazarus bass. It was built for Adam but on delivery UPS managed to damage

0030 Recurve 4

Black Limba with a spalted Beech top. Wenge/Black Limba neck. Spalted Acrylic impregnated finger board ACG EQ01 pre-amp ACG FB humbuckers.

0029 Harlot R Type 5 string.

Santos Rosewood top with 5 mm Zebrano accent and an American Black Walnut body. 7 piece neck Mac Ebony/Bubinga/Maple/Wenge. Acrylic impregnated Zebrano finger board 35" scale alloy side dots

0031 Finn Fretless 4.

A few firsts in this bass. Finn prototype body shape and also a piezo bridge. Spec Alder body with a 3 piece Flame Maple neck and Indian Ebony

0028 Recurve Single cut fretless

Spec Sappy Redwood top with a Black Limba body. 7 piece mac ebony/maple/black limba/maple neck with an Acrylic impregnated Mac Ebony board. ACG EQ01 pre-amp with a RFB in

0027 Harlot 6

Spec Goncalo Alves top and back with a butternut core. 7 piece neck Mac Ebony/Maple/Black Limba/Maple with a flat Rosewood finger board alloy side dots 34" scale. ACG EQ01

0023 Recurve single cut 5

4 piece wenge/bubinga body. 7 piece maple/wenge neck with an Acrylic impregnated Ziracote finger board. ACG EQ01 pre-amp with 18 volt supply, ACG FB pickups with coil switching,low battery

0025 Harlot S Type

Flame Sycamore with a Wenge top. 7 piece Flame Sycamore/wenge neck with a birdseye maple bound Mac Ebony finger board. ACG EQ01 pre-amp with ACG FB pickups ceramic magnet

0026 Recurve 4

Spec Camphor Burl top with a 4 mm Tulipwood accent and a Spanish Cedar body wenge control cavity cover. 3 piece Santos Rosewood/wenge neck with an Acrylic Impregnated Black

0024 Recurve 4

The spec. Black Limba body with a burl Redwood top black accent veneer. Neck Wenge/Limba 5 piece with a quilted Maple fingerboard. Redwood headplate wenge backplate

0022 Recurve single cut

Claro Walnut top and back with a Black Limba core and black veneer contrast veneer. Neck Bubinga/wenge 5 piece Mac ebony fingerboard. ACG RFB in the bridge FB in

0021 Recurve 4 string.

The spec on this one. One piece Amboyna Burl with sapwood front and back with a Mahogany core and black accent veneers. Maple/wenge 5 piece neck with an excellent

0018 J Type 5 string

The spec Black Limba body with a Flame Maple top and black contrast veneer. 7 piece Maple/Bubinga neck with a Mac Ebony board Flame Maple headplate Black

0016 Recurve 5 single cut

The spec. Claro Walnut top with a Black Limba body, black accent. Neck is a 7 piece with a Mac Ebony centre and then Black Limba/maple. Walnut headplate Black

014 Skelf 6 string headless.

Body core White Limba top and back Flame Redwood black veneer accent line. Neck Mac ebony/bubinga. Fingerboard Acrylic Impregnated Spalted/Flame Maple. Ramp Redwood and White LImba

013 Harlot fretless

Body core Black Limba with quilt maple back and front black accent veneer and ebony centre line. Neck Flame sycamore/wenge 5 piece with an Acrylic impregnated Purpleheart finger

015 Recurve 6 single cut (left hand)

The spec. Amboyna Burl front and back with a Black Limba body core with black veneer contrast line. Neck will be a Bubinga/Wenge 7 piece with Amboyne head-plate,back-plate

012 Harlot S Type

Harlot S Type single cut for Peter.First of a new model Harlot single cut. The spec for this one. Top and back Black Heart Sassafras.

011 Recurve single cut.

Hi Just got this bass about ready to go. Body in Black Limba with a Flamed Bibinga top and black veneer accent line. Neck 7 piece Bibinga/maple

010 Recurve single cut.

The spec on this one. Body core will be Swamp Ash with a Sappy Redwood top and a Quilt Maple back both with a black accent line. Neck

006 Harlot

This is the first of this model to be built. I am pretty happy with it from a design point. It balances very well and I find it to

007 Skelf Guitar

That is the guitar Chris has been building with some help from me. The spec. The body core is Flamed Sycamore with a Native Walnut top and back

008 Recurve Single Cut

That is the first Recurve single cut finished and will be on it's way to David on Saturday. The spec. Body woods, Alder with an Santos Rosewood top

005 Recurve for Paul finished.

Paul's review of his Recurve. Review: Ok I thought I would write a proper review after having the bass for a few weeks. I'll update it after

001 Recurve finished

Dave's bass is now complete and will be on it's way tomorrow morning. The spec. Camphor burl top and back with a black limba core and black contrast

004 Skelf Guitar

This is Shaun's guitar to match RC4 003. The spec. Black limba body with quilt maple top with a black veneer contrast line and an ebony centre line. Maple/mahogany

003 Recurve

That is Shaun's bass finished and should be in his hands by Wednesday. The full spec. Body is in Black Limba with a Quilt Maple top with contarst veneer

ACGuitars - Gallery