 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Click on an image to see larger version. | Please note all images are for illustration purposes only |
|||
| All basses share the following common features | ||||
| 2 piece body made from swamp ash, black limba, alder, mahogany or black walnut (other woods available on request). | ||||
| Book-matched top of your choice with a contrast veneer. | ||||
| Bolt on or set neck. Scale options available from 32" to 35". We use threaded steel inserts and 5 mm stainless steel machine head bolts. | ||||
| 5/7 piece laminated neck with a wide choice of woods. All necks feature matching head-plate and a dual action truss-rod plus 2 carbon rods. | ||||
| Fingerboards are available in a wide choice of woods both fretted and fretless. I also offer Acrylic Impregnated fingerboards making it possible to use woods not normally suitable for fretless fingerboards. | ||||
| Mother of pearl or aluminum side dots. | ||||
| Hipshot Ultralite tuners in black or chrome. | ||||
| Hipshot Type A bridge in black or chrome. Standard string spacing 18mm. Custom spacing available on request. | ||||
| ACG custom wound pickups. FB (humbucker in a standard soap-bar format) RFB (MM style humbucker) SB (narrow single coil soap-bar) |
||||
| All ACG Basses will now use the new filter based pre-amp. | ||||
| Neutrik locking output. | ||||
| DR handmade strings. | ||||
| Top of the range Ritter gig bag. | ||||
| Finish is in Acid Catalysed Lacquer with various sheen levels available. | ||||
| Pickups and Pre-amp The ACG pickups are wound for me by Aaron Armstrong. Our standard set up uses two different magnet types. In the bridge pickup I use a Ceramic magnet and in the neck an Alnico magnet. This gives a good combination of bright/punchy sound from the bridge pickup and a warmer/rounder sound from the neck pickup. |
||||
| Pricing All instruments are priced on an individual basis.For a full quote please contact us with your requirements. There are various options available to further customise your bass please get in touch to discuss your requirements. |